Gen 3 Double Spare Wheel carrier
Posted: Thu Nov 03, 2016 4:15 pm
Hi Gents,
After breaking of my rear bumper while sand driving I have looked at replacement bumpers for the Gen 3 Pajero but could not find any thing I like.
I decided to design my own and I am at the point of ordering the laser cutting to be.
You don't have to commit but are there any Pajero owners that might be interested.
Some info:
Standard hinge, no spindle, almost guaranteed not to break.
When swing are is closed it rest on the snatch plate, partially taking the load off the hinge.
Hinge: 50mm outer, 40mm shaft
Increased departure angle as the bumper is flush with the rear lights, you can still access the roof if you stand on the inside of the boot.
Low profile LED rear lights incluing very bright reverse LEDs
Industrial and replaceable clamps to close the swing arm, also lockable with a pad lock.
Main bumper made of 4mm steel
Sides 3mm
Main brackets are adjustable for easy installation, The brackets are attached and then the bumper is attached to the brackets, adjustable left right, forward and back
Sandblasted, treated and powder coated
Removable spare wheel carriers.
Can take tyres up to 285/75 16
Gas arms assist with opening and keeping it open, no need for any manual locks.
Standard high lift jacking points at the bottom, no need for extenders.
Price: +/- R 18 000
If interested please phone me on 072 141 0566
After breaking of my rear bumper while sand driving I have looked at replacement bumpers for the Gen 3 Pajero but could not find any thing I like.
I decided to design my own and I am at the point of ordering the laser cutting to be.
You don't have to commit but are there any Pajero owners that might be interested.
Some info:
Standard hinge, no spindle, almost guaranteed not to break.
When swing are is closed it rest on the snatch plate, partially taking the load off the hinge.
Hinge: 50mm outer, 40mm shaft
Increased departure angle as the bumper is flush with the rear lights, you can still access the roof if you stand on the inside of the boot.
Low profile LED rear lights incluing very bright reverse LEDs
Industrial and replaceable clamps to close the swing arm, also lockable with a pad lock.
Main bumper made of 4mm steel
Sides 3mm
Main brackets are adjustable for easy installation, The brackets are attached and then the bumper is attached to the brackets, adjustable left right, forward and back
Sandblasted, treated and powder coated
Removable spare wheel carriers.
Can take tyres up to 285/75 16
Gas arms assist with opening and keeping it open, no need for any manual locks.
Standard high lift jacking points at the bottom, no need for extenders.
Price: +/- R 18 000
If interested please phone me on 072 141 0566