I doubt that you will be able to set up the timing accurately without the bottom cover.
I would in an emergency advance until it pings and then retard a marked point on the crank pulley (Harmonic Balancer) by 5mm which roughly translates to 2 degrees.
AFAIK you will have to undo the crank bolt to get that cover on/replaced - make sure you replace the crank bolt with the updated one
http://autosa.webs.com/apps/forums/topi ... bolt-issue
Don't play if you are unsure. Pinging can cause a headgasket to fail pretty quickly or damage the main bearings or gudgeon pins.Frankm wrote:Thanks, i will try and let you know how things went.
Frank M
4ePikanini wrote:I doubt that you will be able to set up the timing accurately without the bottom cover.
I would in an emergency advance until it pings and then retard a marked point on the crank pulley (Harmonic Balancer) by 5mm which roughly translates to 2 degrees.
AFAIK you will have to undo the crank bolt to get that cover on/replaced - make sure you replace the crank bolt with the updated one
http://autosa.webs.com/apps/forums/topi ... bolt-issue
Thanks for that info. Didn't know about new bolts. Hopefully the agents will have them in stock.