Page 1 of 1
Pipe connecting injection and manifold
Posted: Tue Jun 29, 2010 6:32 pm
by Brink_015
To all the gurus out there,
Gen II Pajero 3.5GLS
The copper pipe that connects the injection system and the manifold has been "blowing" and a new one from the Stealers are R1040.00
I have heard that one can eliminate the pipe and BLANK off the two openings without any undue problems.
This be true???
Re: Pipe connecting injection and manifold
Posted: Tue Jun 29, 2010 7:59 pm
by paw_by_paw
Hi Brink,
Try these guys first,
For advice,maybe a cheaper spare as well
M-Tech
Levi or John
011-892 4128
083 550 5441
Regards
Re: Pipe connecting injection and manifold
Posted: Tue Jun 29, 2010 8:38 pm
by 4ePikanini
are you talking about the egr pipe that connects the intake manifold to the exhaust manifold?
Re: Pipe connecting injection and manifold
Posted: Wed Jun 30, 2010 5:45 pm
by Brink_015
Hi 4eP,
That is the culprit yes.
Any advice? - Please
Re: Pipe connecting injection and manifold
Posted: Wed Jun 30, 2010 9:04 pm
by 4ePikanini
south africans are not bound by the strict emissions standards, so if your warranty doesn't get voided then i would recommend blanking it off.
I merely just took off the pipe and had it cut and crimped and put it back on - i don't know if this will create an error with your ecu though.
before
after
Re: Pipe connecting injection and manifold
Posted: Thu Jul 01, 2010 3:22 pm
by Brink_015
Thank you for the illustrations and help.
Will do the modifications.
Cheers