Page 2 of 3
Re: Pajero Gen 3 Lexus V8 conversion
Posted: Tue Sep 17, 2013 11:17 pm
by stig351
hi Andref.
i have a 1998 pajero evo with a shot motor,i am fitting a 1uz ls400 motor,my friend workes in a engineering shop but it is are first conversion of this type!!
just wondering if you would have the CAD drawings for the adapter plate,flywheel and spigot bearing carrier,,,it would be a huage help to us...
thanks in addvance
Re: Pajero Gen 3 Lexus V8 conversion
Posted: Wed Sep 18, 2013 1:35 pm
by andref
Hi there
Let me check with the guys that did mine and see if they have it on hand. Just a note though, mine was a 2000 model Gen3 manual and the gearbox side might be different to yours.
Andre
Re: Pajero Gen 3 Lexus V8 conversion
Posted: Wed Sep 18, 2013 11:56 pm
by stig351
that would be great ..thanks so much..
i think the bolt pattern is the same..it defiantly looks the same from your pictures
hope they have them now..it will seriously speed up this project
thanks again
Re: Pajero Gen 3 Lexus V8 conversion
Posted: Mon Sep 30, 2013 7:24 pm
by stig351
Hi.. Just wondering if you had a chance to ask the guys in the machine shop about CAD drawings for adapter plate and flywheel yet? Starting to get wintery hear now.. Haha
Thanks
Re: Pajero Gen 3 Lexus V8 conversion
Posted: Tue Oct 01, 2013 12:53 pm
by andref
Hi there
Yes, sorry, been a bit hectic lately. I'll chase him again. He said it would not be a problem to supply the CAD's to us.
Andre
Re: Pajero Gen 3 Lexus V8 conversion
Posted: Wed Oct 02, 2013 2:53 pm
by stig351
That would be great.. Thanks
If your too busy I could try contact them directly..
My machine guy is eager to get going on it as the winter is coming soon..
Thanks again
Re: Pajero Gen 3 Lexus V8 conversion
Posted: Mon Oct 07, 2013 4:20 pm
by andref
Ok, we finally managed to dig the files up, so here they are.
The zip contains the CAD for the flywheel (standard 4M41 clutch kit) to fit the 1UZ as well as the adaptor between the 1UZ and the 4M41 manual gearbox.
If you need any further info, feel free to mail craig (at) harpersportscars (dot) com as he is the guy that made these up.
Re: Pajero Gen 3 Lexus V8 conversion
Posted: Mon Oct 07, 2013 11:25 pm
by stig351
thats great,,thanks a million man..
i will let you know how we get on
chris
Re: Pajero Gen 3 Lexus V8 conversion
Posted: Wed Dec 11, 2013 9:23 am
by pjjimbo
Hi Andre and Stig, from New Zealand, some good info here.
I have just got a 2001 SWB DiD body minus the engine, have been throwing around the idea of a 1UZFE transplant.
Mine has the V5A5 tiptronic auto in it, which I hear is hard to mate to the 1UZ.
Can I have an opinion - should I go manual conversion (Andre did you use the V5M31 box?) or go 4speed pajero auto? I would prefer manual but I cannot find any info on a manual conversion in this shape Pajero.
How's your conversion going Stig?
What specs are you running?
Cheers guys
Re: Pajero Gen 3 Lexus V8 conversion
Posted: Tue Feb 18, 2014 12:40 am
by chesmari
pjjimbo wrote:Hi Andre and Stig, from New Zealand, some good info here.
I have just got a 2001 SWB DiD body minus the engine, have been throwing around the idea of a 1UZFE transplant.
Mine has the V5A5 tiptronic auto in it, which I hear is hard to mate to the 1UZ.
Can I have an opinion - should I go manual conversion (Andre did you use the V5M31 box?) or go 4speed pajero auto? I would prefer manual but I cannot find any info on a manual conversion in this shape Pajero.
How's your conversion going Stig?
What specs are you running?
Cheers guys
I asked spitronics about using the V5A51 for my conversion but they said that there's not a whole lot of info about it to make it work with their TCU and I have yet to see anyone using the V5A51 with a UZ engine. I am going the route of using the AISIN A340F transmission since there's plenty of it around.
HTH
Ryan
