Stofjakkals
Re: Pajeros at breakers yards and scrap dealers
Good Afternoon,

I need the lower rear door hinge for a 1998 (Gen 2) 3000 V6 SWB. Mine is completely worn out and are having problems closing the door.

Anybody know of a hinge or possible "stripper" please let me know.

Good Day!
Stofjakkals
Re: Pajeros at breakers yards and scrap dealers
hogbeast wrote:I need the left CV complete for 1996 2.8 TDi LWB
Hmmm....not @ the big hole, but if you don't come right, give Jürgen @ Mega Cage a call, maybe he can help or direct you somewhere.

http://www.megacage.co.za/
DAHavenga
Re: Pajeros at breakers yards and scrap dealers
I bought a Gen 3 lwb 3.0 VR Exceed which I am stripping for interior spares. No engine and gearbox but most the rest is still there.

It was a Japanese import so some of the bits and pieces are a little different. Let me know if you need anything.
Attachments:
DSC05225.JPG
DSC05224.JPG
DSC05219.JPG
DSC05218.JPG
Re: Pajeros at breakers yards and scrap dealers
Wonder if there any Gen 4 Bullbars lying around???
Re: Pajeros at breakers yards and scrap dealers
Pajero Sport spares -

I saw a rolled champaigne colour 2010 Pajero Sport 3 weeks ago at H&H Spares in Wellington, Western Cape (0218643835).

I had been phoning around to find an extra 17" rim for my Gen4 GLS LWB prior to my recent trip. Wellington was a bit far to go for a rim, but after no success elsewhere, I stopped there on my way, for the supposed "17inch ali rim off a 2010 Pajero". They saw my Gen4 at the door, and swore the ali rim would fit, even though it looked different to mine. I paid their asking price of R1700 for the one rim (in very good condition), and luckily stopped at the local Hi-Q to have my tire put onto it. Asked them to try the rim on my front first. Didn't fit! Hole in the centre was too small.

Went straight back to H&H with the rim and they refunded me. I asked to see the vehicle it had come off, and found it to be a Pajero Sport. Rolled with roof crushed, but lots of parts still on it.
terrys
Re: Pajeros at breakers yards and scrap dealers
Hi Guys, anybody know where I can find a Gen 3 being broken, I need a sun roof glass frame and the seal rubber, my frame has rusted out and the roof leaks. The dealers want almost 8gs for a simple pressed steel frame and over 2gs for a simple sealing rubber, highway robbery.
Re: Pajeros at breakers yards and scrap dealers
terrys wrote:Hi Guys, anybody know where I can find a Gen 3 being broken, I need a sun roof glass frame and the seal rubber, my frame has rusted out and the roof leaks. The dealers want almost 8gs for a simple pressed steel frame and over 2gs for a simple sealing rubber, highway robbery.
Terrys

Not sure if Dhavenga still has his donor vehicle and what is left of it, but his had a factory fitted sunroof. Worth a try. See his posting earlier on in this thread.

CATS
2009 Pajero 3.2 DiDc Lwb GLS (Gen4) - Casper (Starting to grow on me)
2001 Pajero 3.2 DiD Lwb GLS Manual (Gen3) - Snoopy (SOLD but not forgotten)
2008 Pajero 3.2 DiDc Lwb GLS Auto (Gen4) - Silvester (SOLD)
Image
DAHavenga
Re: Pajeros at breakers yards and scrap dealers
Hi

Sorry, sun roof is gone.

Regards
Re: Pajeros at breakers yards and scrap dealers
Pajero.jpg
Hey guys,

I am looking for a pajero sport rim 17" like in the picture. I want 1 rim and a friend wants 4 or 5 of this same rim.

I am also looking for the plastic mud flap and section in front of the door for the passenger side. It meets the wheel arch and is the mud flap and a small portion of the panel in front of the door. Basically from the model which had the 2 piece front wheel arch.

Please let me know where I can find these.
hercules
Re: Pajeros at breakers yards and scrap dealers
Hi, I found these guys at Kameeldrift outside Pretoria recently. They specialise in Mitsubishi and they are a nice friendly bunch to deal with.

Location: Plot 272, Kameeldrift, Kameeldrift, Pretoria, Gauteng, South Africa
Phone Number : 083 2847734
Post Reply