Tx Simon, also have two 4M40 Blocks, one damaged, a cylinder head, 2 fuel pumps and the odds and ends from a complete engine.SimonB wrote:I have started this thread and made it a sticky.
Many people are always looking for bits and pieces especially for the older models. Some people also scour breakersyards on the off chance.
If there is something specific you are looking for, post it in the wanted section, and if people see pajeros that can be stripped, post:
Location:
Model / Year:
Condition:
Breaker Contact Details (if possible):
Lets see if this can work.
I will prune posts older than 30 days not to clutter up the works
If you take the rubber to a supplier of these type of products (eg the one listed above) they will find an equivalent rubber profile to replace it.paramaniac wrote:ok this is going to be a tough one. I have searched high and low for the front windscreen rubber seal and rear window rubber seal for a 1985 Gen 1 Turbo wagon. I even found a site that gave me all manufacture details according to VIN No, but no luck on these seals. I desperately need them and would appreciate any help on locating either OEM ones or pirate/pattern parts
You buy the rubber per m and join it with special Super Glue.
(That's what I did with mine)
Gerhard Fourie
If you want to shoot somebody, make sure you aim at his head, not your own foot.
Me
If you want to shoot somebody, make sure you aim at his head, not your own foot.
Me
Squire, what area are you from?
I am looking for an aircon bracket that fits the 4m40 (pajero).
Mine cracked and before I could have it welded, it dissapeared
I am looking for an aircon bracket that fits the 4m40 (pajero).
Mine cracked and before I could have it welded, it dissapeared
Hi all
Im looking for an accelerator pedal the one with the 8pin connection (drive by wire) for a pajero IO 2000 model
Im looking for an accelerator pedal the one with the 8pin connection (drive by wire) for a pajero IO 2000 model
HI, I am looking for a electric window motor for a Pajero IO 1,8 if any one can help.
Hi there
I'm looking for the interior light(rooflight) for a gen 2 swb,(dont know why one will take it out and not put it back
)
Thanx Henk
I'm looking for the interior light(rooflight) for a gen 2 swb,(dont know why one will take it out and not put it back
) Thanx Henk
Morning guys
I am looking for the display that shows your digital watch and radio channels etc,
Is their anyone that knows of where i can source the above item or of a after market product mine is fading you can not read the display anymore.
Thanks and have a good weekend.
wally
I am looking for the display that shows your digital watch and radio channels etc,
Is their anyone that knows of where i can source the above item or of a after market product mine is fading you can not read the display anymore.
Thanks and have a good weekend.
wally
Hi guys
Me again i did not mention that it is for a gen 3 DiD pajero 200 model i suppose the 2001 and 2002 models display should fit .Am i right or not ?
Thanks
Wally
Me again i did not mention that it is for a gen 3 DiD pajero 200 model i suppose the 2001 and 2002 models display should fit .Am i right or not ?
Thanks
Wally
Hi Wally
If you are interested I have a black and white display. Just the top right numbers are not right. I can have it repaired by my guys at work if you want to buy it.
Regards
Nick
If you are interested I have a black and white display. Just the top right numbers are not right. I can have it repaired by my guys at work if you want to buy it.
Regards
Nick