MorneDJ
3.2 a/t gears not engaging
Ok. I changed my oil today but in order to get on my ramps I had it in the 4LLc. After doing everything I did not start the engine (wanted to check oil levels) and just moved the gear lever to neutrel and moved backwards of the ramp (about 1m). After checkingvthe oil levels I switched on the engine for about 10 minutrs while I cleaned the tools and area.

I the moved the lever to 2H and engaged drive. nothing. nothing. The car actually moved backwards.

I tried every option in the proces but switched the engine off. The car is now stuck in the driveway.

The lights on the dash shows that thw back wheels are selected (green lights on) but the front lights (top) are flashing. Any ideas.
User avatar
Affiliate Member
3.2 a/t gears not engaging
Did you drain engine or gearbox fluid?

Check both levels!


Sent from my iPad using Tapatalk because forumrunner keeps crashing on ios 6
Re: 3.2 a/t gears not engaging
Morne,

Go thru the gearbox selection to 4LLC (steering central and gearbox in neutral) and make sure that it gets selected (4LLC). Then whilst still in neutral and steering in the centre, go back thru the selection 4H+diff locked, then 4H and lastly 2H. Make sure that the box makes each selection. You can try and move SLIGHTLY forward and rearward. I had the same problem a while ago and got everything back in line by following the above procedure.

Cloyd.
Post Reply