Good stuff Ian, well done!
- Kurt
2014 Pajero SWB 3.2 GLS | EFS Suspension | Stofpad Bashplates
2008 Pajero LWB 3.2 GLS (Sold @ 243,000km)
2014 Pajero SWB 3.2 GLS | EFS Suspension | Stofpad Bashplates
2008 Pajero LWB 3.2 GLS (Sold @ 243,000km)
Hi John
I think it was the drilling of the top two holes, into the metal bracket. As you know the angle is not great, and the first bit we used was maybe not the sharpest. After it got sharpened on a grindstone all went ok. We did come very close to the top of the dash, but it worked out ok.
I think it was the drilling of the top two holes, into the metal bracket. As you know the angle is not great, and the first bit we used was maybe not the sharpest. After it got sharpened on a grindstone all went ok. We did come very close to the top of the dash, but it worked out ok.
@IanH: I seem to be unable to PM you for some reason.
I get the following message when trying to compile a message: "We are sorry, but you are not authorised to use this feature. You may have just registered here and may need to participate more to be able to use this feature."
So, could you please drop me a mail @ John.okennedy@gmail.com
I get the following message when trying to compile a message: "We are sorry, but you are not authorised to use this feature. You may have just registered here and may need to participate more to be able to use this feature."
So, could you please drop me a mail @ John.okennedy@gmail.com
Afternoon guys
Have been reading these threads for a while now, seems like the fix is working great
I am based around Nelspruit region. Whould like to get these brackets in my vehicle, seen the tutorial. So i think I might be able to get them in
Who do i contact to get some brackets?
Thanks
Have been reading these threads for a while now, seems like the fix is working great
I am based around Nelspruit region. Whould like to get these brackets in my vehicle, seen the tutorial. So i think I might be able to get them in
Who do i contact to get some brackets?
Thanks
You can call me, I make them. 083604 eight four five fiveLYCAN wrote:Afternoon guys
Have been reading these threads for a while now, seems like the fix is working great
I am based around Nelspruit region. Whould like to get these brackets in my vehicle, seen the tutorial. So i think I might be able to get them in
Who do i contact to get some brackets?
Thanks
- Kurt
2014 Pajero SWB 3.2 GLS | EFS Suspension | Stofpad Bashplates
2008 Pajero LWB 3.2 GLS (Sold @ 243,000km)
2014 Pajero SWB 3.2 GLS | EFS Suspension | Stofpad Bashplates
2008 Pajero LWB 3.2 GLS (Sold @ 243,000km)
Yes indeed, if you can organize 3 or 4 guys on one Saturday then I can shoot through ;D. Cost will be about R1000 per car to cover fuel and materials. ;DRoelf_le_Roux wrote:Time for a Lowveld group fix???
- Kurt
2014 Pajero SWB 3.2 GLS | EFS Suspension | Stofpad Bashplates
2008 Pajero LWB 3.2 GLS (Sold @ 243,000km)
2014 Pajero SWB 3.2 GLS | EFS Suspension | Stofpad Bashplates
2008 Pajero LWB 3.2 GLS (Sold @ 243,000km)
Thanks Kurt
Will give you a call in the next few days, stuck in strange working hours
Will give you a call in the next few days, stuck in strange working hours
Did my second dash fix in Cape Town yesterday, this time on an almost new vehicle with the Rockford touch screen. The owner initially only wanted the brackets, planning to fit them himself as he is technically inclined, but I suggested he might want to spend the extra money to get someone who knows how to open all the panels. After watching me dismantle, he said that he probably wouldn't have got past the air vents.
All went well, and I got my time down to 3 hours, which still included plenty of chatting.
Still have 3 sets of brackets in stock.
All went well, and I got my time down to 3 hours, which still included plenty of chatting.
Still have 3 sets of brackets in stock.