MR2-Blue
Re: Re-Activation Gen 3 Taillights
No - you are not...
The as built version has:
2 reverse lights (left and right) and on the right side the rear fog light in the upper lights - that's it....
jaco_n
Re: Re-Activation Gen 3 Taillights
Went to two scrapyards today and no luck. Only hae 3 Gen 2's on the yard and their light fittings are different. Any suggestion where to look next? Not sure if the stealers will sell them. Midas also do not stock the fittings.

What is the small "dust covers" for next to each light fitting?
User avatar
Site Admin
Re: Re-Activation Gen 3 Taillights
Jaco

You went to a scrapyard in Cape Town and never mentioned to me Gen 2s.. which yard??
Simon Bloomer
Re: Re-Activation Gen 3 Taillights
Jaco

I live in Cairo and have a 3.8 LWB 2005 Pajero here. In Cairo the bumper lights are blocked off and only the "real" lights are operative. If you wish I can look for a second hand set for you or a new set and bring them back when I next come to Cape Town. I have already got a set for my 2004 3.2 DiD LWB in Cape Town.

If you are thinking this route I can get some prices for you. I got my set "free-ish" ... if you get my point.

Cheers

Nic
2004 3.2DiD LWB, 2006 Club Cab 4x4
jaco_n
Re: Re-Activation Gen 3 Taillights
Hi Simon...try Crash Flash the truck section in Stikland. Hopefully you get what you want or if yo want me to look for something , let me know and I an try to go there and take photo's of parts you looking for etc.

Nic, sounds good to me. Let me know the prices you can get it for then I can decide. If you can send me some pic's if need be.
cheers!
johanvanwyk
Re: Re-Activation Gen 3 Taillights
I got a set, left and right, from Speedgrand auto parts yesterday, cost R1400 for both, that include all the reflectors , bulbs and wiring.
Have a bit of a problem on the connector, as these tail lights are for the Taiwanese model. But there is nothing that a side cutter and insulation tape can't fix!
I just have to cut and fit the connectors from the old tail lights.
For those interested: 087 809 0361
Okavango junction, Brackenfell
Re: Re-Activation Gen 3 Taillights
johanvanwyk wrote:I got a set, left and right, from Speedgrand auto parts yesterday, cost R1400 for both, that include all the reflectors , bulbs and wiring.
Have a bit of a problem on the connector, as these tail lights are for the Taiwanese model. But there is nothing that a side cutter and insulation tape can't fix!
I just have to cut and fit the connectors from the old tail lights.
For those interested: 087 809 0361
Okavango junction, Brackenfell
Johan

Can you post a pic of what they look like? The lights that is, not the connectors :)

CATS
2009 Pajero 3.2 DiDc Lwb GLS (Gen4) - Casper (Starting to grow on me)
2001 Pajero 3.2 DiD Lwb GLS Manual (Gen3) - Snoopy (SOLD but not forgotten)
2008 Pajero 3.2 DiDc Lwb GLS Auto (Gen4) - Silvester (SOLD)
Image
CJJD
Re-Activation Gen 3 Taillights
This forum is causing me to take on DIY projects I wouldn't normally dream of! Thanks guys.
Attachments:
photo lights.jpg
CJJD
Re-Activation Gen 3 Taillights
I thought this was a bit to easy.....my new brake lights/ back lights are now also indicators! Must have wired it wrong
Re: Re-Activation Gen 3 Taillights
Johan
It's been a long time, but SpeedGrand actually still have record of your purchase.
I just got the same lights. I also have to change the plugs. Do you still remember how the wiring works?


Sent from my iPad using Tapatalk
2005 Pajero GLS LWB DiD
Geolander AT/S, FrontRunner roofrack, OME, dual-battery
Nikon D4, 500VR
Post Reply