I am looking to fit a Diff Lock to my 1999 Hyundai Galloper Exceed (Basically a 1st Generation Pajero) - It's a 3.0 L V6 Petrol.
Has anyone got any recommendations as to a suitable product & where I could get one ?. Also for a 'reasonably' technical individual can they be fitted as a DIY project ?.
I'll swap you for a few hen's teeth! 
The best would be to confirm the diff ratio (1:4.875 / 1:4.625), and then look for a Gen2 blister fender's complete rear differential, which has the factory locker installed.
If you find two, you will sell it very fast!
The best would be to confirm the diff ratio (1:4.875 / 1:4.625), and then look for a Gen2 blister fender's complete rear differential, which has the factory locker installed.
If you find two, you will sell it very fast!
Gerhard Fourie
If you want to shoot somebody, make sure you aim at his head, not your own foot.
Me
If you want to shoot somebody, make sure you aim at his head, not your own foot.
Me
Does it have to be a diff from a Gen 2 Fender Blister or can it be from a bakkie (Colt, Toyota) with diff lock (if ratio is same 1: 4.875)?
Ok thought strikes me now about difference in suspension but still if it is not a sealed diff it might be possible to transfer the actual diff lock mechanism to your current diff?